Electrical Troubleshooting in Wesley Chapel, FL
Trips, Dead Outlets, and Faults That Won't Stay Put|Licensed & Insured, EC13011268
Many of Wesley Chapel's houses are young, and young houses still develop faults: a breaker that won't hold, a run of outlets that goes dead with nothing tripped, a light that quits when it rains. Troubleshooting is the visit that finds out why, so the fix goes where the problem is.
Mention the year the house was finished, if you know it.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.
At a glance
What Wesley Chapel's Houses Bring to a Troubleshooting Call
Wesley Chapel is part of unincorporated Pasco County, and much of its housing is recent: of an estimated 27,239 homes, 2,534 were built in 2020 or later (Census Bureau estimates, 2020 to 2024). New houses are built with GFCI or arc-fault protection on the circuits in kitchens, baths, garages, outdoor outlets, and many living spaces, so a dead outlet or a tripped circuit can be a protective device doing its job, and the question is what made it act.
Nearly four in five occupied homes here, an estimated 19,705 of 25,223, heat with electricity, so the first cold mornings put the heat strips, a large load, back on those circuits. Water is another trigger: when Hurricane Milton came through in October 2024, Bay News 9's storm totals listed 11.40 inches of rain for Wesley Chapel.
How it runs
How a Fault Gets Pinned Down Here
-
1
A record of when it happens
If the fault comes and goes, note the time, the weather, and what was running each time it happens.
-
2
When the fault shows, and when it doesn't
A fault present on the day is often found during that visit. One that comes and goes may need your log and a second visit once the pattern shows.
-
3
A look at the fault, with you
Before any repair starts, the electrician shows you the fault, explains what caused it, and what will fix it.
-
4
The fix, or a written quote
Smaller repairs are done on the same visit where possible. Bigger work, such as a panel or a rewire, is priced in writing for you to decide on, and any required permits go through Pasco County Building Construction Services.
What we cover
What the Hourly Visit Checks
Mapping the circuit: A tracer follows the dead run back to its breaker and shows every outlet and light that shares it.
Insulation testing where needed: If the wire itself is suspect, a megger puts a test voltage on it to reveal insulation damage a standard meter won't.
Testing devices and connections: Outlets, switches, fixtures, and the connections behind them, including outlets wired through the push-in holes on their backs.
Your side of the service: The meter base and the service connections on the house are yours, and we work on them. The meter and the lines that feed it belong to the power company.
Pricing
Billing for a Fault Hunt
Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installations, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Our warranty
03If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
The builder finished our house in 2021. How can the wiring already have a fault?
Since a heavy rain, the GFCI on our outdoor outlet trips and won't reset. What's going on?
The heat came on the first cold morning, and its breaker tripped. Can we just reset it?
Some outlets in the bathroom and garage are dead, but no breaker is tripped. What should we check?
Lights in several rooms get brighter and dimmer at the same time. Is that serious?
Reviews
Request service
Describe the Fault, and We'll Start From There
Tell us which rooms are affected and whether anything was added or changed lately. Our office will reach you during business hours.