Electrical Panel Repair in Wesley Chapel, FL
For a Panel That Runs Hot, Hums, or Won't Hold a Main|Licensed & Insured, EC13011268
If a breaker in your Wesley Chapel panel runs hot, hums, or won't stay on, the question is what failed and whether fixing it will last. We open the panel, identify the failing part, and tell you whether a repair is likely to hold or the panel has reached the point of replacement.
Tell us whether it's heat, a hum, or a breaker that won't stay on.
Sparks or smoke at the panel mean keeping everyone back and calling 911. Don't open the panel door to switch it off.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.
At a glance
Panel Age and Pasco's Power Rules
About 4,028 Wesley Chapel homes were built in the 1990s, according to Census Bureau estimates for 2020 to 2024. A panel that came with one of those houses has reached, or passed, about 30 years, at which point we recommend replacing a panel rather than repairing it.
Pasco County's Building Construction Services sets the permit and power rules for Wesley Chapel. Under the county's rules, neither a homeowner nor a contractor may disconnect the power company's supply to an existing building on their own: the power company has to authorize it, which matters whenever a repair reaches the main or the service.
How it runs
A Panel Visit, Opened and Explained
-
1
What you noticed
Tell us what made you call. If the breaker giving trouble is one you can name, such as the dryer's or the air conditioner's, say so. If the house dates from the 1990s and the panel has never been changed, mention that too, since it brings the repair-or-replace question to the front of the visit.
-
2
Both halves of the 240-volt breakers
The electrician checks each two-pole breaker on both of its halves, then the single breakers, their terminals, and the main, looking behind and around each one for the marks that heat and loose wires leave.
-
3
The fault shown, and a verdict
The electrician shows you the fault itself, whether that's a scorched terminal, a loose screw, or a breaker whose grip on the bus has gone slack, and tells you whether the panel around it is worth keeping.
-
4
The named parts, and nothing else
Once you agree, only the parts named in that verdict are replaced or remade, and the circuits we touched are switched back on and tested before the electrician leaves.
What we cover
What Gets Fixed Inside the Box
Two-pole breakers: The 240-volt breakers behind a dryer, range, water heater, or air conditioner can fail on one side only, so a dryer that tumbles but won't heat can trace back to the panel. A failed one is replaced with a two-pole breaker listed for the panel and sized for the circuit.
A builder's panel in a newer house: One breaker that won't hold, or one connection that has worked loose, is replaced or remade, and the rest of a sound panel stays in place.
Breakers someone else added: A breaker that fits but isn't listed for your panel is replaced with one that is, and two wires sharing a terminal made for one are separated, each to its own terminal.
Rust and scorching: Surface rust on metal that's still sound is cleaned off. A corroded or scorched breaker or part is removed, and a new one is installed.
Neutral and ground: Those connections are checked, and a grounding or bonding fault is quoted as a separate repair.
A panel past repair is quoted in writing as a separate replacement job. The brands we recommend are Square D and Siemens.
Pricing
The Hourly Visit and the Replacement Quote
Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Our warranty
03If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
Our house was built in the 1990s and still has its first panel. Should we repair it or replace it?
Pasco lets small home projects under $7,500 skip the permit. Does that cover a panel repair?
The panel failed, and the power is off. How soon can you come?
Can we keep the refrigerator and the air conditioning running while you work?
One breaker feels hot when we touch it. How worried should we be?
Reviews
Request service
How Old Is the House, and Where's the Panel?
Say which appliance stopped working, if one did. Our office will reach you during business hours.