Electrical Troubleshooting in Bayonet Point, FL
Intermittent Faults in 1970s and 1980s Wiring, Traced|Licensed & Insured, EC13011268
In a Bayonet Point house, the outlets, switches, and breakers can still be the ones the builder put in. A connection that has carried the same load for decades can start failing now and then before it fails for good.
Mention when the problem shows up and what was running.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.
At a glance
Decades-Old Connections and Shared Walls
Bayonet Point grew up in the 1970s and 1980s, and its housing shows it: of roughly 13,500 homes, about 6,000 date from the 1970s and another 4,100 from the 1980s, and fewer than 330 are older than 1960 (Census Bureau survey estimates, 2020 through 2024). A house from those decades can have a device or a connection that has aged in place, and that kind of wear shows up as a fault that comes and goes. Houses from about 1965 to the late 1970s can also have aluminum branch wiring.
Not every home is a house on its own lot. About 2,650 are in buildings of two or more units, about 700 more are attached, and about 1,000 are mobile homes. About 3,200 of the 11,200 occupied homes are rented. Each of those changes where a troubleshooting visit starts: a villa or condo has its own panel inside a shared building, a mobile home is fed from a post outside it, and in a rental, the lease can leave the repair decision with the owner.
How it runs
Where the Electrician Starts, Home by Home
-
1
House, villa, condo, or mobile home
Tell us which it is when you call. That tells us where the panel is likely to be, whether service equipment outside the home is part of the picture, and whether anyone besides you needs to agree to a repair.
-
2
The original devices, opened
Testing starts on the circuit that misbehaves and works outward from it. Unless something is scorched, buzzing, or smells like burning, leave things plugged in the way they were until then; resetting and unplugging everything hides the pattern.
-
3
Your call, or the owner's
You see the failed connection before anything is replaced. A panel replacement or other permitted job gets a written quote first; we file the permit with the county and book the inspection.
What we cover
Faults That Age Into a 1970s House
In a 1970s or 1980s house: The outlet, switch, or breaker the builder put in, tested where it sits, along with the connection behind it. If an outlet or its plate looks scorched, buzzes, or smells like burning, leave it unused, and call 911 if you see smoke, sparks, or fire.
In a villa, condo, or attached home: A dead wall or room traced from your unit's panel, up to the point where the building's shared equipment begins.
In a mobile home: The home's own panel and the circuits it feeds, and the equipment outside that feeds the panel.
Inside a wall or an attic run: A megger test shows whether that run's insulation is failing before any wall is opened.
Half the house dark: One leg of the incoming service may be down. We test the panel and the parts of the service the house owns; the meter itself is the power company's.
Pricing
The Clock Starts at the Door
Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.
In a villa or condo, the visit goes faster when someone has the key to any shared electrical room.
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Our warranty
04If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
We rent our house. Can we call you ourselves, or does the landlord have to?
We're in a villa, and the outlets on one wall went dead. Is that our panel or the building's?
Power in our mobile home cuts out in a few rooms at a time. Where does the check start?
The bathroom GFCI trips every morning when the hair dryer runs. Is the outlet bad, or the wiring?
Our house has had a lot of do-it-yourself work over the years. Will that make the fault harder to find?
Reviews
The Record So Far
Straight from Google, in our customers' own words.
Request service
Have the Pattern Ready When You Call
If it's a villa or a condo, include the building and unit number. Our office will reach you during business hours.