Outlet and Switch Installation in Spring Hill, FL
Placed for What the Room Does Now|Licensed & Insured, EC13011268
A room in a Spring Hill house can change jobs more than once. It starts as a bedroom, turns into an office, and later becomes a guest room or a nursery, while its outlets and switches stay where the first floor plan put them. Kennedy Electric adds, moves, and replaces them so they suit the room's new use.
Name the room's old job and its new one.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.
At a glance
Spare Rooms and Home Desks in Spring Hill
About one in seven Spring Hill workers, 7,112 of 49,924 by census estimates, worked from home. A home desk tends to land in a room that was wired for something else, which is why an outlet job here often begins with the question of what the room used to be.
A bedroom is the likely candidate. About seven in ten homes, 34,333 of 48,996 in the estimates, have three or more bedrooms, so a home office, where there is one, often takes one of them. Its outlets were laid out around a bed and a dresser, and the outlet the door switch runs may sit on the wrong wall for a desk.
About 12,700 owner-occupied Spring Hill homes were built in the 1980s, the estimates show. In a house of that age, one bedroom circuit can also feed the hall or the room next door, and the outlets may be worn enough that plugs sag. Adding outlets in a house like that starts with finding which circuit the room shares and what else that circuit carries.
How it runs
Getting a Room Ready for New Outlets
-
1
Settle where the furniture goes
Before the visit, decide where the desk, bed, crib, or chair will stand, and list what will plug in at each spot. New outlets placed to a layout that changes a month later end up behind a bookcase.
-
2
Leave the walls and the attic hatch reachable
On visit day, clear a path to the walls that will take new outlets and to the attic access, which is often a hatch in a closet ceiling or in the garage. If the job adds a circuit or runs new cable to new openings, it is permitted work in Hernando County, and Kennedy Electric files for the permit and sets up the county's inspection.
-
3
Write down what each new outlet is for
Once the work is done, note which outlets were added for the desk, the bed, or the crib, and which ones sit on a new circuit if the job added one. When the room takes on another use later, that note shows what the walls already offer before anyone plans the next outlet.
What we cover
When a Room Changes Jobs, Its Outlets Follow
Desk outlets for a bedroom turned office
A desk wall wants power where the computer, monitor, printer, and router sit, and a bedroom seldom has it there. New outlets can go in along that wall, so cords stop crossing the floor. The wall where the internet line enters the room is a good one to plan the desk and its outlets around. Cords that now run under a rug or pinch beneath a door show where an outlet belongs.
Switches and outlets for a guest room or nursery
A guest room needs an outlet on each side of the bed for lamps and phone chargers, and a switch at the door that turns on a light before anyone crosses the room. A nursery adds a spot for a baby monitor and a night light on a wall away from the crib, with the monitor and its cord kept well back. Tamper-resistant outlets, with shutters behind the slots, suit the whole room.
An office handed back to a bedroom
When the desk moves out, the outlets put in for it can simply stay and serve the bedroom. A box that no longer has a job can be closed with a blank plate.
A workstation corner in the family room
A desk in an open room has no door to close and often sits far from the nearest wall outlet. Power can come from a new outlet on the closest wall or the side of a built-in, and a switch can be added for a desk light. Mark where the chair rolls, so no new outlet ends up where a chair wheel will hit the plug.
Pricing
Pricing Outlets for a Room's New Use
The price follows the room's new layout: how cable reaches each new spot, whether the desk calls for its own circuit, and how many outlets and switches the plan adds. A visit to find out why an existing outlet is dead is repair time.
Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.
Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Our warranty
05If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
Can the switch by the door turn on the desk lamp's outlet and leave the ceiling light alone?
In our Spring Hill home office, the breaker trips when the printer and a space heater run together. What fixes that?
The wall where the bed will go in our 1980s Spring Hill house has one outlet. Can more be added without opening the whole wall?
Is the 6/12 rule why the outlets in our Spring Hill spare room sit where they do?
The desk wall in our Spring Hill office has a two-plug outlet in the right spot. Can it become a four-plug one?
Reviews
Owners on Their Added Outlets
Straight from Google, in our customers' own words.
Request service
What Is Your Spring Hill Room Turning Into?
Tell us what the room was, what it's becoming, and what will plug in there. Photos of the walls help. Our office will reach you during business hours.