HomeElectrical RepairDimmer & Smart Switches
Dimmer and Smart Switch Installation in Brooksville, FL
LED-Compatible Dimmers|Smart Switches and Smart Plugs|Licensed & Insured, EC13011268
Tell us the bulbs, the rooms, and any app or hub you use.
- Bulbs checked too: If the lamps won't dim well, you'll know before the switch goes in.
- Three-way and multi-gang setups: One light from two places, or several dimmers in one box.
Swapping a light switch for a dimmer or a smart switch looks like a 10-minute job. Whether it works well depends on the bulbs it controls and the wires in the box behind the plate.
We install dimmers matched to the LED lamps they'll power, and smart switches that fit your existing wiring. Switches you've bought yourself are welcome too.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.
Dimmers and Smart Switches explained
Why LED Lamps and Dimmers Have to Be Matched
An old dimmer was designed for incandescent bulbs, which drew a lot of power and dimmed smoothly with almost any control. LED lamps draw a fraction of that and have their own electronics inside, so the dimmer and the lamps have to agree on how dimming works.
What a mismatch looks like
- Flicker or strobing at low settings.
- A buzz from the switch or the fixture.
- Lights that stay dark until the slider is halfway up, then jump on.
- A faint glow when the dimmer is off.
- Only a narrow range between dim and full.
How we pair them
Dimmer makers publish lists of the lamps they've tested with their controls, and LED lamps are sold as dimmable or not. We choose a dimmer rated for LED loads, check that the number of lamps falls within its minimum and maximum limits, and set its low-end adjustment, where available, so the lights hold steady at their dimmest. Mixing lamp brands on one dimmer is where trouble starts, so we'll suggest keeping each dimmer's lamps the same.
Smart switches and the wire they may need
A smart switch stays powered on all the time, even when the light is off, so it can listen for your phone or voice assistant. Some models draw that power through a neutral wire in the switch box. Homes wired before the code began calling for a neutral at switch locations may not have one there. The answer is a smart switch made to work without a neutral, or running a neutral to the box.
- Wi-Fi switches connect straight to your router.
- Other brands talk to a hub or bridge.
- Three-way smart switching uses a companion switch at the second location.
- Several dimmers side by side lose some of their rated load when ganged, and bulky smart switches can need a deeper box.
Smart plugs
A smart plug needs no electrician: it goes into an outlet and switches whatever is plugged into it.
Smart thermostats
We don't install smart thermostats. They connect to your heating and cooling system, so we refer them to an HVAC contractor.
How a Switch job runs
Getting the Right Switch on the Wall
-
1
1. Tell us what the switch will run
The lamps or fixtures, how many on each switch, and which app, hub, or voice assistant you use.
-
2
2. We open the switch box
We check the wiring in the box and whether the light is controlled from more than one place, then walk you through the options.
-
3
3. Estimate, switch by switch
Each switch is listed, including any wiring change it needs.
-
4
4. Installed and set
The circuit is turned off; the switch goes in; the dimmer's low end is set to your lamps so it adjusts; and each control is tried with you.
| Control | What it does | What it needs |
|---|---|---|
| LED-rated dimmer | Smooth dimming of LED lamps | Dimmable lamps within its load range |
| Smart switch or smart dimmer | App, voice, and schedule control | A neutral, or a no-neutral model |
| Three-way smart setup | Control from two places | A companion switch |
| Multi-gang dimmer box | Several dimmers in one box | Ganged dimmers derated; deeper box where needed |
Estimates for Switch work
What Goes Into a Switch Estimate
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.
What the estimate depends on
03- How many dimmers and switches, and how many locations control each light.
- Whether the lamps need changing to dim well.
Our warranty
04If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
Real customer stories
From Our Google Reviews
Straight from Google, in our customers' own words.
Will my smart switch still work if the Wi-Fi goes down?
Can you install smart switches I've already bought?
Contact us
Plan Your Dimmers and Smart Switches
Tell us which rooms and what lamps are in them. We'll get back to you during business hours.



