Two men reviewing a tablet by vans

Electrical Repair in Bayonet Point, FL

Garage Outlets, GFCIs, and the Circuits Behind Them|Licensed & Insured, EC13011268

A Bayonet Point garage may do more than park a car. It can hold a golf cart and its charger, a boat's battery tender, a freezer, and the opener, all on outlets that may date from the original build. When something goes dead, the garage is a good place to start looking, even if the outlet that quit is in another room.

Say which outlet quit and what was plugged into it.

Licensed & Insured · Florida Certified Electrical Contractor EC13011268★ Google RatedNo trip charge, no service fee

If an outlet or the panel smokes, sparks, or smells of burning, keep everyone clear of it and call 911.

Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.

Man at an open breaker panel, deadfront off, working on breakers

At a glance

A Garage That Has to Stay a Garage

In the Beacon Woods villages listed in its deed restrictions, trailers, boats, campers, golf carts, and all-terrain vehicles may stay on a lot only inside a covered garage. The association's architectural guidelines also state that no exterior structural or architectural changes may be made to convert a garage into living space. So in those villages, the garage tends to keep its job, and its outlets carry whatever lives in there besides the car.

That puts a lot on wiring that may be original. A garage that has never been rewired may still carry its first receptacles and a GFCI that has been there for decades. A few jobs need no permit in Pasco, and one on the county's list is an opener on the garage's existing wiring. A new or extended circuit needs a permit, and Kennedy Electric files that application.

Electrician working inside an open exterior electrical panel with exposed wiring

How it runs

Working Through a Garage Call

  1. 1

    One reset, if nothing is wet

    If water or rain reached the outlet or the floor beneath it, leave it off until it's been checked. If nothing is wet, find the GFCI in the garage and press RESET once. A GFCI that drops out again right away has had its one try, so leave it off and note what was plugged in.

  2. 2

    Following what that outlet protects

    On site, our electrician tests the GFCI, every outlet it protects, and the receptacle each garage load uses, working from the device that tripped out to the farthest outlet on its circuit.

  3. 3

    A swap on the box, or a new circuit

    A fix can be a device replaced where the old one sat, a loose or burnt connection remade in its box, or a new or extended circuit carried out to the spot where the load sits.

  4. 4

    The garage, plugged back in

    With the repair done, reconnect the freezer, the charger, and the opener one by one, so a fault that rides in with one of them shows up right away.

What we cover

The Garage Circuit and What Rides on It

The receptacles along the walls: Outlets that went dead, crack when a plug goes in, or won't grip anymore are replaced with GFCI-protected or tamper-resistant devices where code calls for them.

The GFCI that guards them: One that won't reset, or trips with nothing plugged in, is tested and replaced if the device itself has failed.

Power for the opener and the ceiling light: The outlet the opener plugs into, the light over the bay, and the switch by the door are repaired or swapped on the box that's already there.

A circuit asked to do too much: A freezer, a second refrigerator, and a cart charger on one outlet string can keep a breaker or a GFCI tripping. The circuit and its connections are tested, and if the load needs a circuit of its own, that new circuit is estimated in writing.

Outlets in other rooms that trace back here: A dead outlet by the back door or in a bath can sit on the garage GFCI's circuit, so the search for the tripped or failed device can end out here.

Just outside the door: The outdoor receptacle by the drive and the coach lights on either side of the garage, repaired or replaced with fittings rated for the weather.

Pricing

Hourly Repair Time and Written Estimates

01

Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.

02

We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.

We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.

Our warranty

03

If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.

Common questions

Cart Chargers and Other Garage Loads

The golf cart charger runs in our garage at night, and the GFCI out there trips now and then. What else goes off with it?

Everything that GFCI protects, which can include the freezer. A trip in the night can leave a freezer off until morning, so it's a reason not to put the visit off. If nothing is wet, one reset is fine until then; the charger itself, if it's the cause, is outside what we repair.

We'd like to use part of the garage as a hobby room. Can you wire it?

A workbench circuit and better lighting are everyday garage jobs. The bench outlets can go in at working height along the wall the bench stands on, and the tools that will run there decide whether the bench needs a circuit of its own.

The opener and the garage light quit at the same moment. Is the opener broken?

Probably not, if both went at once. They often share an outlet, a GFCI, or a breaker, so the first check is whether power still reaches the opener's outlet. If it does and the opener stays silent, the trouble sits in the opener.

The light over our garage bay flickers. Is it the bulb or the wiring?

Try a new bulb of the type the fixture is rated for first. If the flicker persists, the switch by the door, the fixture's socket, or a connection inside the box could be the cause, and testing will tell which. If it buzzes or smells hot, leave that switch off until the visit.

Someone ran an extension cord across the garage ceiling to reach the opener. Can it stay?

A cord isn't meant to stand in for a permanent outlet. A receptacle at the opener replaces the cord, and adding one extends a circuit, which is permitted work in Pasco.

Reviews

Repair Calls We've Answered

Straight from Google, in our customers' own words.

Google reviews widget
Man at an open exterior breaker panel/meter working

Request service

What Does Your Garage Run?

List what plugs in out there and which outlet stopped working. Our office will reach you during business hours.

Kennedy Electric
1160 Ponce De Leon Blvd, Brooksville, FL 34601
Monday through Friday, 8 a.m. to 4 p.m.
Licensed & Insured · Florida Certified Electrical Contractor EC13011268
Serving Citrus, Hernando, and Pasco Counties, and nearby Sumter County.
Property type*
Best way to reach you*