RV and Camper Hookups in Spring Hill, FL
Wired to the Spot Where the Rig Will Sit|Licensed & Insured, EC13011268
On a Spring Hill lot, the RV outlet is set at the place the rig will park, and for a permitted stay Hernando County wants that place drawn on a site plan before the cable goes in. Kennedy Electric installs 30-amp and 50-amp RV outlets for Spring Hill homes and runs each one to the rig's own parking place.
Name the spot on your lot the rig will use.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.
At a glance
Hernando's Two RV Permits and the Power Behind Them
Power to an RV used at a home in Hernando County is tied to the county's RV permit, which comes as a two-week visitor permit or a six-month resident permit. Under it, power issued for the RV ends when the permit does. An RV outlet for a permitted stay is a feed with an end date, planned around the stay it serves.
An RV that brings friends or relatives to the county may be used at the host family's home for up to 14 days, and the visitors file an application with the county's zoning official within two working days of arrival. A stay that short rarely calls for a permanent pedestal at the back of the lot.
An RV permitted while a house is being built or installed on the property is disconnected from all utilities 30 days after the house receives its certificate of occupancy, so its feed is planned for the build and the month after it.
How it runs
How an RV Hookup Comes Together in Spring Hill
-
1
Mark the parking spot first
Settle the RV's spot before anything else. Sketch it on a copy of your lot, mark the side of the house where the electrical panel hangs, and pace off the distance between the two. The same sketch serves the zoning application and the estimate visit.
-
2
Permits from more than one office
The RV permit itself is a zoning application, handled by Planning and Zoning. Electrical, plumbing, and any other work permits come through the Building Division. We take care of the electrical one, and the inspector will need a clear path to the panel and the outlet. The sewer, septic, or holding-tank arrangement the application also asks about is plumbing and health department work, which sits outside ours.
-
3
The outlet goes in at the marked spot
The circuit runs from the panel out to the pad or wall chosen in the sketch. The RV plugs in once the county's inspection has passed.
What we cover
The RV's Spot on the Lot, and the Outlet It Needs
Each of the spots below is planned on its own terms, down to whether it needs an outlet at all.
The driveway or side yard, for a visiting RV
A visiting rig usually sits on the driveway or beside the garage, close to the house. Its outlet can mount on the garage wall or the house wall facing the drive, on a short run from the panel, with the cord kept clear of the front walk. Many travel trailers plug into a 30-amp outlet and larger motorhomes into a 50-amp one; the plug on your rig decides which.
The site-plan spot, for a permitted RV stay
For a resident permit, the outlet belongs where the approved site plan puts the RV, not wherever wiring would be easiest. When that spot is a pad away from the house, the outlet stands on a post or a factory pedestal at the pad's edge, with its cable buried from the house.
Beside a house that's still going up
On a lot with a house under construction, the new panel may not be live yet, so the source of the RV's feed depends on what is energized on the site at the time. That part is planned with whoever runs the build, whether the owner or a general contractor.
The RV's storage spot at the side or rear
Of the permitted rigs, only the one tied to a home's construction is stored on the lot once the house is finished, at the side of the home or the rear of the lot, meeting the setbacks for that zoning. Its power has ended by then, so the storage spot is planned without an RV outlet. A rig on a six-month resident permit leaves the parcel when that permit ends.
Pricing
What Shapes an RV Outlet Estimate in Spring Hill
Each spot on the lot is priced on its own, once the visit has measured how far it sits from the panel.
Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.
Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Our warranty
05If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
Our Spring Hill house has a 200-amp service. How many 50-amp RV outlets can it carry?
How far from a Spring Hill house can the RV outlet stand?
Family is bringing a camper to our Spring Hill house for a two-week visit. Can it plug into an outlet we already have?
Does an outdoor RV outlet need a special cover?
Does the RV outlet need a ground rod of its own?
Reviews
Kennedy's Record With Spring Hill Clients
Straight from Google, in our customers' own words.
Request service
Ready Your Spring Hill Lot for the RV
Tell us which permit the RV will park under, visitor or resident, and whether a house is still going up on the lot. Our office will reach you during business hours.