HomeUpgrades & InstallsPanel Upgrades & Replacement

Electrical Panel Upgrades and Replacement in Brooksville, FL

New Panels and Service Upgrades|Permit, Power Company, and Inspection Handled|Licensed & Insured, EC13011268

Tell us what you're adding, or send a photo of the panel label.

Licensed & Insured · Florida Certified Electrical Contractor EC13011268★ Google RatedFree estimate on panel replacement
Kennedy Electric electricians installing a new electrical panel in Spring Hill, FL.
  • Replacement and upgrades: Same size or more capacity, sized to what the house runs.
  • An estimator on site: Load, code, and power-company requirements checked before pricing.
  • Licensed & Insured: Florida Certified Electrical Contractor EC13011268.

Four things bring people to a panel replacement: the panel is full, an EV charger or tankless water heater is coming, the insurer wants it replaced, or the panel is simply old.

We handle the paperwork and the power company. We apply for the permit, coordinate the power shut-off and restore with the power company, and schedule the county or city inspection. You just provide access for the inspector.

Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.

Why panels get replaced

What's Driving Panel Upgrades on the Nature Coast

Three things put a new panel on the calendar in homes here: the insurance company, new equipment the old panel can't carry, and a panel that has simply reached the end of its life.

Older electrical panel inspected by Kennedy Electric
01

The insurance company

Many Florida insurers flag certain older panel brands, and insurers note panel age on 4-point reports.

Kennedy Electric electrician testing an electrical panel
03

Age and condition

Heat, humidity, and decades of use wear panels out. Burn marks, excessive corrosion, and breakers that run hot are reasons to replace rather than repair.

EV charger installed by Kennedy Electric
02

More load: EV chargers, tankless water heaters, and mini-splits

Each of these adds a large circuit, and an older 100-amp panel with every space filled may not have the room or the capacity for it. A new panel of the same size can solve the space problem; if the load has outgrown the service, the house needs more from the power company.

  • EV chargers: a 240-volt circuit sized to the charger, up to 60 amps for a hardwired unit.
  • Tankless electric water heaters: often among the largest loads in a house.
  • Ductless mini-splits: each outdoor unit gets its own circuit.
  • Pool equipment, hot tubs, and workshop tools add up in the same panel.

Replacement or service upgrade

Same-Size Replacement or a Service Upgrade?

Two jobs share the same name. A like-for-like replacement swaps the panel and breakers and keeps the service the house already has. A service upgrade increases the capacity from the power company, which usually means changes at the meter base and the service conductors, as well as the power company's involvement on its side.

Replacement: the right call when the panel is the problem, and the load hasn't grown.

Service upgrade: the right call when a load calculation shows the house needs more than it has.

Either way, the estimator's load calculation decides it.

Five steps

From Estimate to Inspection

  1. 1

    1. Schedule with the estimator

    Our estimator comes out, looks at the panel, the service, and what you want to add, and collects what's needed to price it.

  2. 2

    2. Load, code, and power company

    On-site, the estimator checks what the code and the power company require for your service and runs the load numbers if capacity is the question.

  3. 3

    3. Permit and power company

    Once you approve, we apply for the permit and coordinate the power shut-off and restore.

  4. 4

    4. Installation day

    The old panel comes out, the new one goes in, and every circuit is reconnected, labeled, and tested. The house is without power for part of the day.

  5. 5

    5. The inspection

    We schedule the county or city inspection.

What's included

What a Panel Replacement Includes

ItemCoveredNotes
Estimator visit and load reviewYesFree estimate for defined-scope panel work
New panel and breakersYesSquare D, including QO, or Siemens recommended
Reconnecting and labeling every circuitYesTested after the swap
Surge protective deviceCan be added with the panelRequired by Florida's electrical code
PermitYesWe apply for it
Power-company shut-off and restoreYesWe coordinate it
Meter base and service conductorsOn service upgradesPriced in the estimate when needed
InspectionYesWe schedule it; you give the inspector access
Grounding and bonding correctionsAs foundQuoted if the existing system needs work
Kennedy Electric electrician installing a subpanel

Sometimes a subpanel is the better answer

If the main panel is sound but the new load is far from it, such as a detached garage, a workshop, or a pool, and the service has the capacity for it, a subpanel near the load can make more sense than replacing the main.

How panel work is priced

How Panel Upgrades Are Priced

Estimates

01

We don't do upfront pricing. Some companies quote one standard figure for a panel replacement before anyone has been to the house. Your panel job is priced once our estimator has seen it.

We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.

Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.

Why two panel quotes differ

02

Three things move a panel quote:

  • Whether the job is a like-for-like replacement or a service upgrade.
  • Anything the code adds, such as the surge device.
  • Where the panel is and how easily the circuits reconnect.

Our warranty

If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.

Real customer stories

Service Upgrades, as Customers Tell It

Estimate explained, work reviewed

“Kennedy Elect came out for the estimate explained what was needed and or needed to be corrected. Friendly, professional direct and to the point. Set up a date and time, technicians arrived on time and got to work fast. They did a solid job took time out to review the work done, validated the work, warranty ect. They even handled the permit with the county.”

Sloan, Google review

A service upgrade, start to finish

“I am impressed with Kennedy Electric. Every interaction from the first call for an estimate through installing a new upgrade to my electric service, they were kind, professional, knowledgeable, and very customer service oriented. Roger provided me with the estimate, and he was the main reason I chose Kennedy. He explained everything the work entailed and answered all of my questions.”

Jane Reynolds, Google review

Estimate emailed, permit taken care of

“Our house was in need of a electric service upgrade and Kennedy Electric was recommended to do the job. I found that Kennedy Electric was easy to work with from the start of the job to completion. Kennedy Electric was easy to get a hold of, showed up on time for the job estimate, emailed the job estimate to me, at which time you can accept or decline for Kennedy to perform the work. Kennedy took care of getting the electrical permit.”

Ray Eichlin, Google review

Straight from Google, in our customers' own words.

Google reviews widget · live from GBP

Frequently asked questions

Panel Upgrade Questions

What size panel or service do I need?

The estimate names the size, based on what the house runs now and what you plan to add.

Can I add an EV charger without upgrading the panel?

Sometimes. If the load calculation shows room, a dedicated circuit is enough; if it's close, a load-management device may be an option.

Will a new panel lower my electric bill?

No. A panel distributes power; it doesn't change how much the house uses. The reasons to replace one are safety, capacity, and insurance.

Do I need to be home on installation day?

Someone needs to let us in and be ready for the power to be off for part of the day.

Does a new panel mean rewiring the house?

No. The existing circuits are reconnected to the new panel. If any circuits need attention, such as aluminum branch wiring, we will let you know and quote it separately.

Contact us

Request a Free Panel Estimate

Tell us what you're adding or what your insurer asked for, and send a photo of the panel label if you can. We'll get back to you during business hours.

Kennedy Electric
1160 Ponce De Leon Blvd, Brooksville, FL 34601
Monday through Friday, 8 a.m. to 4 p.m.
Licensed & Insured · Florida Certified Electrical Contractor EC13011268
Serving Citrus, Hernando, and Pasco Counties, and nearby Sumter County.
Property type*
Best way to reach you*