HomeSmoke & CO Detectors

Smoke and CO Detector Installation in Brooksville, FL

Hardwired and Interconnected|Smoke, CO, and Combination Alarms|Licensed & Insured, EC13011268

Include how many detectors you have and whether the house has gas appliances or an attached garage.

Licensed & Insured · Florida Certified Electrical Contractor EC13011268★ Google RatedFree estimate on detector installs
Hardwired smoke and carbon monoxide alarm installed by Kennedy Electric in a Hernando County, FL home.
  • Sealed for 10 years: No battery to change every six months.
  • Licensed & Insured: Florida Certified Electrical Contractor EC13011268.

A detector chirping at 3 a.m. is one reason to call us. A remodel that adds rooms, or an inspection report that lists missing alarms, is another.

We install and replace hardwired smoke alarms, carbon monoxide alarms, and combination units, interconnected so one alarm sounds them all. Our standard unit is the BRK 10-year sealed alarm.

Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.

How home Alarms Should work

What Your Home's Alarms Should Be Doing

01

Why sealed 10-year units

Most of our customers don't remember to change replaceable batteries. A sealed unit carries its battery for the life of the alarm. When the 10 years are up, it signals, and the whole alarm is replaced.

02

Hardwired and interconnected

A hardwired alarm runs on house power with a battery as backup. Interconnected alarms are wired to one another, so smoke in a back bedroom sets off the alarm in the living room, too. One smoke detector for the whole house and no carbon monoxide alarm anywhere is a setup we still find.

03

Where smoke alarms go

The Florida Building Code requires smoke alarms in each bedroom, outside each sleeping area, and on every level of a home, with interconnected units in new construction. Homes built under older rules may have fewer. We recommend bringing an older home up to that layout even where no rule forces it.

04

Where carbon monoxide alarms go

Florida law requires a carbon monoxide alarm within 10 feet of each bedroom in new homes and additions built on or after July 1, 2008, that have a fuel-burning heater or appliance, a fireplace, or an attached garage. A combination smoke and CO alarm covers both jobs in one device. Beyond what the law requires, we recommend a CO alarm outside every bedroom, on every level of the home, and inside any bedroom that has a fuel-burning appliance. That goes for any home with gas appliances or an attached garage, whatever its age.

05

When a detector chirps

A chirp is the alarm asking for attention: a low battery backup, a replaceable battery due for replacement, or a unit at the end of its life. Smoke alarms are meant to be replaced 10 years from the date printed on the back, so a chirping unit past that date needs replacing, not a new battery.

06

Doorbells and cameras on the same visit

A detector visit can also cover a video doorbell, or the power and cabling for security cameras.

How a Detector upgrade goes

Swapping Out the Old Alarms

  1. 1

    1. Count what's there

    Tell us how many alarms the house has now, where they are, and roughly how old they are.

  2. 2

    2. A location list

    The estimate lists each location and the type of alarm it gets: smoke, CO, or combination.

  3. 3

    3. Installation

    The old units come down, and new alarms go up on existing or new wiring, interconnected.

  4. 4

    4. Tested together

    Each alarm is tested, along with the interconnection between them.

What's included

Alarms by Situation

SituationWhat we installWhy it matters
One detector for the whole houseAlarms in bedrooms, halls, and each levelCoverage where people sleep
Gas appliance, fireplace, or attached garageCombination smoke and CO alarmsCO warning near bedrooms
Remodel adding bedrooms or living spaceNew interconnected alarmsTied in with the rest
Detectors listed on an inspection or evaluationThe alarms the report calls forAddresses the listed item

We don't install or monitor fire alarm systems or burglar alarm systems.

Estimates and Service Calls

Detector Estimates and Service Calls

01

We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.

We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.

02

Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.

03

Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.

Our warranty

04

If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.

Real customer stories

Feedback From Area Homeowners

Straight from Google, in our customers' own words.

Google reviews widget · live from GBP

Frequently asked questions

What Homeowners Ask About Alarms

My carbon monoxide alarm is going off. What should I do?

Get everyone out into fresh air and call 911 from outside. Don't go back in until the fire department says it's safe. After that, have the fuel-burning appliances checked by their service company, and call us about the alarm.

Can new detectors connect to the ones I already have?

Interconnected alarms must be compatible with each other, which in practice means they are from the same manufacturer's line. A partial upgrade can mean replacing the older units too.

Do I need an electrician for battery-only detectors?

No. A battery-only alarm goes up with a screwdriver. Hardwired and interconnected alarms are electrical work.

Is a 10-year sealed alarm maintenance-free?

The battery is. Press the test button once a month and keep dust out of the vents.

Do you install fire alarm or burglar alarm systems?

No. We don't install or monitor fire alarm systems or burglar alarm systems.

Contact us

Book a Detector Upgrade

Send the number of alarms the house currently has and where they are located. We'll get back to you during business hours.

Kennedy Electric
1160 Ponce De Leon Blvd, Brooksville, FL 34601
Monday through Friday, 8 a.m. to 4 p.m.
Licensed & Insured · Florida Certified Electrical Contractor EC13011268
Serving Citrus, Hernando, and Pasco Counties, and nearby Sumter County.
Property type*
Best way to reach you*