HomeService AreasNew Port Richey4-Point Inspection Repairs
4-Point Inspection Electrical Repairs in New Port Richey, FL
Service Size, Panel Type, and Old Wiring Corrected|Licensed & Insured, EC13011268
Mention the service size, if the report lists it.
A 60-amp electrical service doesn't meet Citizens Property Insurance's rule for a new policy. A new-business application must show at least 100 amps, and 60 amps remains acceptable only on a policy that took effect before the rule's cut-off date. City officials have said some New Port Richey houses date to the 1930s, 1940s, and 1950s, and one of them can still be on its original 60-amp service.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.

Older houses and the Form
Where an Older House Meets the 4-Point Form
On a house that old, the electrical section of a 4-point inspection can turn on lines a newer house passes without a second look. The Citizens' sample form shows them, and its note to agents says that an application can't be submitted for a property whose electrical system has existing hazards or deficiencies. Other carriers set their own minimums.
Three lines on the form
Amps, Fuses, and Old Cable: What Corrects Each
Inside the city, a service upgrade goes under a Building Division permit, and the shut-off and reconnection are scheduled with Duke Energy.
| Line on the form | What an older house can show | What corrects it |
|---|---|---|
| Main panel: total amps | A 60-amp service, under the 100 amps Citizens wants on new business | A service upgrade. The wires from the service drop, the meter base, and the main breaker are all sized for the new rating |
| Main panel: circuit breaker or fuse | A fuse panel, and with it two listed hazards: blowing fuses, and over-fusing, which means a fuse rated higher than its wire should carry | A breaker panel in its place. On a 60-amp fuse service, that's part of the same upgrade |
| Cloth wiring; active knob and tube | Cloth-jacketed, rubber-insulated cable, or knob and tube that still carries current | New cable in place of those circuits. Where they run through most of the house, that becomes a rewire |

After the correction
What the Repair Leaves on Record
After a service upgrade, the main panel is a breaker panel, and its rating is the number that goes on the total-amps line. The city's permit and its inspection are on record for the address.
We're buying a 1950s house whose owner has been insured for decades. Does the 60-amp allowance come with it?
Can the old circuits be replaced without rewiring the whole house?
Pricing
Pricing the Corrections on a New Port Richey 4-Point
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.
Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.
Corrections under our warranty
04If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
Reviews
Customer Accounts of Our Work, Posted on Google
Straight from Google, in our customers' own words.
Contact us
Share the Electrical Page of Your New Port Richey Report
Tell us whether the main panel has fuses or breakers, and send the report's electrical page or list the lines the inspector marked. If your agent gave you a date, include it. We reply during business hours.



