HomeService AreasHernando BeachBoat Dock and Lift Electrician
Boat Lift and Dock Electrical in Hernando Beach, FL
Lift Circuits, Dock Receptacles, and Shore Power|Licensed & Insured, EC13011268
Say whether your dock is fixed or floating, and what the boat plugs into.
NOAA's tide predictions for station 8727122 (Rocky Creek) run from 3.8 feet down to below minus 1 foot across 2026. A boat, a floating dock, and every cord that connects them move through that range while the dock's fixed wiring stays put.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.
Tide range
What Five Feet of Tide Does to Dock Wiring
The predictions for Rocky Creek
NOAA publishes tide predictions for station 8727122 (Rocky Creek). On September 29, 2026, for example, it predicts highs of 3.6 and 3.1 feet and lows of 0.0 and 1.3 feet: two highs and two lows of different heights, a swing of about 3.6 feet in a morning. Throughout 2026, its highest predicted high is 3.8 feet in July and its lowest predicted low is minus 1.3 feet in December, about 5 feet apart.
Those figures are astronomical predictions. Wind and weather can hold the water above them or push it below, so they set the minimum travel the wiring has to allow for.
Where that travel reaches the wiring
On a fixed dock, the receptacle stays where it's mounted while the boat rises and falls beside it. A shore-power cord that hangs with slack at a summer high can pull tight at a winter low, so the pedestal or receptacle goes where the cord can reach the boat's inlet at the bottom of the range.
A floating dock rides the whole range, so the wiring from the fixed shore to the floating section has to flex through about 5 feet of movement. Rigid conduit can't make that trip, and the connection across the gap is built to move.
Anything attached to a moving part, such as a cable to a lift's control or a cord to a boat on the lift, needs enough slack for the full cycle, from the cradle's lowest point to the top.
Pricing
Pricing Lift and Dock Wiring in Hernando Beach
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.
Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.
Warranty on lift and dock wiring
04If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
Dock Job
Setting Up a Dock Job in Hernando Beach
-
1
1. Fixed or floating, and what plugs in
Photos of the dock, the lift, and the boat's shore-power inlet show what the circuit needs to reach.
-
2
2. Heights measured against the tide
Our estimator notes the deck height, the lift's travel, and where the boat sits at a low tide, so every receptacle and switch is placed for the whole range.
-
3
3. A test through the full cycle
After the work, we run the lift from bottom to top and check the cords and the floating connection at both ends of the travel. Hernando County issues any permit the job needs.
The tide at my dock doesn't match the published times. Why?
My shore power cord is tight on some mornings. Is that a problem?
When is a good time to have the wiring under the dock checked?
Reviews
See Our Latest Google Reviews
Straight from Google, in our customers' own words.
Contact us
Get Your Hernando Beach Dock Wired for the Tide
Send the address, photos of the dock and lift, and whether the dock is fixed or floating. Our office replies during business hours.