HomeHome LightingUnder-Cabinet Lighting
Under-Cabinet Lighting in Brooksville, FL
LED Strips, Bars, and Pucks|Toe-Kick Lighting|Licensed & Insured, EC13011268
Include the length of the counter run if you have it.
- Toe-kick lighting too: A low glow along the base cabinets.
- Beyond the kitchen: Closets and stairways.
- Licensed & Insured: Florida Certified Electrical Contractor EC13011268.
The ceiling light is behind you, so each time you lean over the counter, your body blocks it. Light mounted under the upper cabinets sits in front of you, right on the cutting board.
Under-cabinet LED lighting is the indoor lighting job we do most right now.
Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.
Choosing Under-Cabinet Light
Strip, Bar, or Puck: Choosing the Light Under Your Cabinets
Three kinds of fixture
- LED tape in an aluminum channel: The lowest profile. A diffuser cover blends the diodes into one even line of light.
- Linear LED bars: Slim, rigid fixtures that link end to end, some with a switch built in.
- Puck lights: Round spots. On a polished stone counter, each one shows as its own bright dot.
For an even wash across a glossy counter, a continuous strip or bar gives a smoother result than pucks.
Where it mounts under the cabinet
Mounted toward the front edge of the cabinet, the light spreads across the counter and up the backsplash evenly. Pushed against the wall, it throws bright scallops on the backsplash and leaves the front of the counter dim. A cabinet with a front lip or light rail hides the fixture from anyone sitting at the table.
Power, drivers, and switching
Many LED under-cabinet systems run on low voltage from a driver hidden inside or above a cabinet. The driver is fed from a wall-mounted circuit, and the lights are controlled by a wall switch, a dimmer that suits the driver, or a switch on the fixture. How that feed reaches the cabinets depends on what's behind the wall, which we check at the estimate visit. During a kitchen remodel, with the walls open, it's at its simplest.
Toe-kick lighting
An LED strip along the base of the lower cabinets, on its own switch or a motion sensor, gives enough light to cross the kitchen at night without the overheads.
Color that matches the room
Match the color temperature to the ceiling lights so the counter and the room read as one space. Color rendering matters under the cabinets as much as overhead; it's explained with recessed lights.

How an Under-Cabinet install runs
Four Steps Under the Cabinets
-
1
1. Send photos
The cabinets, the counter, and the nearest outlets and switches. Tell us if you've already picked the lights.
-
2
2. A look behind the cabinets
We check the wall to see where the power can come from and where a switch or dimmer makes sense.
-
3
3. Wiring and mounting
Power is brought to the cabinets, the driver goes out of sight, and the fixtures are mounted and joined.
-
4
4. Lights on
Each run is lit and dimmed, and we show you the controls.
What's included
Under-Cabinet Work at a Glance
| Item | Yes or no | Note |
|---|---|---|
| LED strip, bar, or puck lights, wired in | Yes | Your fixtures or ones we supply |
| Driver installed out of sight | Yes | Inside or above a cabinet |
| New switch or dimmer for the lights | Yes | Matched to the driver |
| Toe-kick lighting | Yes | On a switch or a motion sensor |
How Under-Cabinet Lighting is priced
Under-Cabinet Lighting Pricing
We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.
We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.
Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.
Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.
Our warranty
04If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.
Real customer stories
A Kitchen Relit
New kitchen lighting and a ceiling fan
“We had new kitchen lighting installed and a new ceiling fan installed. Our electrician Kyle was polite, respectful and did a excellent job. When he left he ask if we had any questions and thanked us for our business. We will definitely be using Kennedy electric in the future. Kennedy electric is definitely a new standard of excellence! Thank you!”
Cindy Miraglia, Google review
Straight from Google, in our customers' own words.
Can under-cabinet lights just plug into the backsplash outlet?
Do LED under-cabinet lights get hot?
Contact us
Plan the Light Under Your Cabinets
Whether you've picked the lights or want us to supply them, we'll get back to you during business hours.



