HomeOutdoor LightingLandscape Lighting

Landscape Lighting Installation in Brooksville, FL

Pathway Lights, Uplighting, and Lamp Posts|Low-Voltage Systems|Licensed & Insured, EC13011268

Licensed & Insured · Florida Certified Electrical Contractor EC13011268★ Google RatedFree estimate on landscape lighting
Landscape lighting with path lights, an uplit tree, and a lamp post installed by Kennedy Electric in Hernando County, FL.
  • Lamp posts too. New posts, and replacements for leaning or dead ones.
  • Licensed & Insured. Florida Certified Electrical Contractor EC13011268.

Picture a lit walk from the driveway to the back gate, a live oak washed in light, and a lamp post at the end of the drive.

We install wired landscape systems, from the transformer and the buried cable to the last path light, plus line-voltage lamp posts and the circuits that feed them.

Call (352) 251-2795, Monday through Friday, 8 a.m. to 4 p.m., or send a request online. Calls after hours are returned the next business day.

Wired System or Solar Stakes

Solar Stakes or a Wired System: Where the Difference Shows

01

Output and placement

A solar stake gives back whatever the day's sun put into its battery, so after a cloudy afternoon of thunderstorms the path goes dim. A wired system runs from the transformer at the same output each night. Each fixture is placed and aimed for a job: the edge of a walk, a step, a trunk, or the face of the house. LED lamps keep the power draw low.

02

Materials in the ground

Stainless-steel fixture bodies, cable rated for direct burial, and sealed, waterproof connections at every splice. Florida soil stays damp, and a connection that lets water in corrodes until a run goes dark.

03

Upkeep

One transformer and one timer run the whole yard. Lamps can be replaced without replacing the fixture, and cable is laid away from where edgers and string trimmers work. Solar stakes carry their own batteries and panels, and each one wears out on its own schedule.

04

What a Landscape System Is Made Of

05

The low-voltage transformer

The transformer steps household 120-volt power down to 12 volts for the path lights and uplights. It mounts on an exterior wall or post beside a GFCI-protected outdoor outlet or circuit, and it's sized to the total wattage of the fixtures, with room to add more fixtures. A built-in timer or photocell decides when the lights come on.

06

The fixtures

  • Pathway and step lights. Low, downward light along walks, drives, and steps.
  • Uplights and spotlights. Aimed up into oaks and palms, or across the front of the house.
  • Lamp posts. A taller post at the drive or the walk. Many run on 120 volts from their own buried circuit, separate from the low-voltage system.
07

The trench

Low-voltage cable is buried shallow along beds and walks. A 120-volt circuit to a lamp post is buried deeper, at the depth specified by the electrical code for the cable or conduit used. Oak roots and limestone slow a trench down, which is why the route gets planned before anyone digs.

Kennedy Electric electrician working outside a home

How a Landscape job runs

Lighting the Yard, Step by Step

  1. 1

    1. Show us what you want lit

    The walks, the trees, the entry, and the drive. Tell us what you want to see at night, and what should stay dark.

  2. 2

    2. Fixture positions and estimate

    Fixture positions, transformer mounts, and cable routes are settled, and then the job is priced.

  3. 3

    3. Cable

    The cable is buried along the planned routes and connected with waterproof splices.

  4. 4

    4. Fixtures set

    Each fixture is staked or mounted, connected, and pointed at what it's there to light.

  5. 5

    5. Timer set and handed over

    The timer or photocell is set, each run is tested, and you're shown how to change the schedule and swap a lamp.

What's included

Landscape Lighting Scope

Part of the jobCoveredDetails
Pathway and step lightsYesLow-voltage, along walks and drives
Uplights and spotlightsYesTrees, palms, and the front of the house
Lamp postsYesNew posts and replacements
Low-voltage transformer with timer or photocellYesSized for the fixtures, with room to add
Outdoor outlet or circuit for the transformerWhere neededGFCI protected
Buried cableYesPlanned route

What sets the price

Landscape Lighting Pricing

01

We don't do upfront pricing. No job has a standard price with us: each one is tailored to the property and the work you've asked for, and priced once we've seen it.

We offer free estimates on installs, upgrades, and replacements in our service area. Estimates aren't free when the job needs troubleshooting or testing to price, falls after hours or outside our service area, needs several meetings to gather information, or is new construction or a custom remodel with multi-party walk-throughs. For most jobs, estimates arrive by email by the end of the next business day, and quotes are good for 30 days.

02

Custom homes and large or multi-phase projects are estimated as soon as we can, or on the timeline your project sets.

03

Repair and troubleshooting visits are billed by the hour from arrival: $100 residential, $150 commercial, one-hour minimum, then half-hour increments, plus materials. No trip charge and no service fee. No hidden fees: the 3.5% surcharge on card and ACH payments is listed in our terms.

Our warranty

04

If something we installed fails because of our workmanship within 30 days of completion, we waive the hourly labor to put it right. Materials Kennedy Electric purchases for your job carry the manufacturer's one-year warranty. To replace defective materials we supplied, or materials damaged by storm, flood, fire, or other acts of God, we charge a reduced warranty labor rate of $50 an hour residential and $75 an hour commercial. The warranty does not cover materials not purchased by Kennedy Electric, work performed by the customer, or materials the customer purchased or damaged. Our warranty terms are printed on the estimate, the invoice, and the receipt, and the product boxes stay with you so you can register each product with its manufacturer.

Real customer stories

Homeowner Reviews

Straight from Google, in our customers' own words.

Google reviews widget · live from GBP

Frequently asked questions

After the Lights Are In

Why are the lights at the far end of the run dimmer?

Voltage drops along a long low-voltage cable, so the last fixtures get less than the first. Heavier cable, splitting the run into shorter legs, or a transformer with higher-voltage taps evens it out.

My lamp post stopped working. What's wrong with it?

It could be the lamp, the photocell, a corroded socket, or the buried cable, which a shovel or a fence post can cut. We test from the post back toward the power source to find which.

Can the lights run on a schedule I control from my phone?

Yes. Some transformers have Wi-Fi or app control built in, so you can change the schedule or switch zones from your phone.

Contact us

Plan Your Landscape Lighting

Tell us what you'd like lit and send a few photos of the yard. We'll get back to you during business hours to set up a visit.

Kennedy Electric
1160 Ponce De Leon Blvd, Brooksville, FL 34601
Monday through Friday, 8 a.m. to 4 p.m.
Licensed & Insured · Florida Certified Electrical Contractor EC13011268
Serving Citrus, Hernando, and Pasco Counties, and nearby Sumter County.
Property type*
Best way to reach you*